產品詳情
一、用途(Application)
旋啟式止回閥安裝在管路系統，其主要作用是防止介質倒流，是一種依靠介質壓力開啟和關
閉的自動閥門。
適用于公稱壓力 PN1.0Mpa~42.0Mpa、Class150~2500;公稱通徑 DN50~1200mm、NPS2~48″；
工作溫度-196~540℃的各種管路上，用于防止介質倒流。通過選用不同的材質，可適用于水、
蒸氣、油品、硝酸、醋酸、強氧化性介質等多種介質。
Swing Check Valves is installed in a piping system, which is used to prevent from the substance
back-flowing.
It is an automatic valve depending on the pressure to open and close.
Apply to nominal pressure：PN1.0Mpa~42.0Mpa Class150-2500;Nominal
diameterDN50~1200mm NPS2~48” ,operating temperature-196~540℃in a piping system,it is
used to prevent the back flowing of the media. It can be applicable to water, vapour, oil, hydrogen
nitrate, ethylic acid and strong oxidizing media by choosing different materials.
二、性能參數(Perbance beter)
公稱壓力
Nominal pressure
國標 PN0.6Mpa~PN10.0Mpa 、美標 150LB~2500LB
GB PN0.6Mpa~PN10.0Mpa CLASS 150LB~2500LB
閥體 Body WCB 碳鋼 CF8 不銹鋼 CF3 不銹鋼 CF8M 不銹鋼 CF3M 不銹鋼
閥瓣 Disc CF8 CF8 不銹鋼 CF3 不銹鋼 CF8M 不銹鋼 CF3M 不銹鋼
閥軸 shaft 2Cr13 CF8 不銹鋼 304L 不銹鋼 316 不銹鋼 316L 不銹鋼
彈簧 Spring 304 CF8 不銹鋼 304L 不銹鋼 316 不銹鋼 316L 不銹鋼
適用介質
Suitable medium
水、蒸氣、油品等
Water vapour
oil
硝酸等腐蝕性介質
Nitric acid and other
corrosive media
強氧化性介質
Strong oxidizing
medium
醋酸等腐蝕性介質
Acetic acid and other
corrosive media
尿素等腐蝕性介質
Urea and other
corrosive media
適用溫度
Suitable
temperature
-29~425℃ -196~540℃ -196~425℃ -196~540℃ -196~455℃
2
www.vattenvalve.com
三、采用標準(Standard)
設計與制造：API 6D、ANSI B16.34
Design and Manufacture: PI 6D ANSI B16.34
結構長度：API 6D、ANSI B16.10、DIN 3202
Sructure length: PI 6D ANSI B16.10 DIN3202
壓力——溫度等級：ANSI B16.34、DIN 2401、GB/T9124、HG20605、SH3406、JB/T74
Pressure-- temperature grade: NSI B16.34 DIN2401 GB/T9124 HG20605 SH3406 JB/T74
試驗與檢驗：API 598、JB/T9092
Test and checkout: API 598 JB/T9092
配管法蘭：JB/T74~90、GB/T9112~9124、HG20592~20635、SH3406、ANSI B16.5、DIN2543~2548、
GB/T13402、API605、ASME B16.47
Flang:JB/T74~90 GB/T9112~9124 HG20592~20635 SH3406 ANSI B16.5 DIN2543~2548
GB/T13402 API605 ASME B16.47
四、安裝、使用注意事項(Instgallation and caution)
安裝前應仔細核對標志是否與使用要求相符。
Make sure the mark is consistent with the using requirement before installation.
檢查閥門內腔和密封面，不允許與污物附著。
Check the valve cavity and the sealing surface, which is not allowed that the dirt is attacted.
檢查連接螺柱是否均勻擰緊。
Check the connection stud is screwed evenly
從入口端往里推動閥瓣，檢查其開啟及復位是否靈活。
Push in the valve flap from the entrance, check if it is flexible to open and reset
五、維護保養(Maintenance)
安裝后，應定期進行檢查主要檢查項目：
After installation, should be regularly inspected the main inspection items regularly
密封面磨損情況
Sealing surface wear
搖桿轉動的磨損情況
Wear rocker rotate
閥體的內腔以及密封面之間有否有污物堆積
check there is no dirt accumulation between the inner cavity of the body and the sealing surface.
3
www.vattenvalve.com
五、安裝方向(Installation direction)
